I want my ceiling fan (no light kit) to run independently from my can lights. I was hoping to tap into one of the cans . I wired these cans a few years ago but am no expert on wiring. I want to know what's involved before i climb into the attic.
All the cans are piggy-backed off the one can that's wired to the wall switch.
When I wire the fan, can i tap into any light or does it have to be the first can attached to the switch?
I plan to operate the fan by remote and not use a wall switch.
All the cans are piggy-backed off the one can that's wired to the wall switch.
When I wire the fan, can i tap into any light or does it have to be the first can attached to the switch?
I plan to operate the fan by remote and not use a wall switch.