NewRehabber
Member
- Joined
- Jan 27, 2017
- Messages
- 12
- Reaction score
- 4
I'm installing a z-wave smart switch for my outside lights, and I've come across a problem with the wiring. The previous light switch has only two wires coming to the box - a hot wire and then I guess a wire going to the lights (there are two sets on the house). The switch is controlled by a dimmer switch.
The new switch requires line, neutral, and ground. Any ideas on how to make this work?
The new switch requires line, neutral, and ground. Any ideas on how to make this work?