graybeard47
New Member
- Joined
- Sep 18, 2014
- Messages
- 4
- Reaction score
- 0
I have searched the internet but not entirely comfortable on the results to order a replacement. The parts sheet for the Heat Pump on the contactor shows: CSG part# CTR-0639 with the following description: Single Pole normally open with thru bar. Contacts 240V, FLA 25.0, LRA 150.0; Coil 24V
On the old contactor itself that has a large sticker on it: reading left to right-
General Electric
Volts AC 277 480 600
Full Load Amperes 35
Locked Rotor Amperes:
>>1 PH (Blank)
>> Per? ( rubbed thru)150 125 100
Resistive Amperes Per Pole 35
At the very bottom on the same tag: CR353CB3AH1AG
Very small white tag near the contactor's mounting base: ;
24v 60hz
24v 50hz
55-827h
On the old contactor itself that has a large sticker on it: reading left to right-
General Electric
Volts AC 277 480 600
Full Load Amperes 35
Locked Rotor Amperes:
>>1 PH (Blank)
>> Per? ( rubbed thru)150 125 100
Resistive Amperes Per Pole 35
At the very bottom on the same tag: CR353CB3AH1AG
Very small white tag near the contactor's mounting base: ;
24v 60hz
24v 50hz
55-827h
