Search results

I do not think so I have one (heat anticipator) in the thermostat. pictures attached...thanks for all your help !!

this assumes my thermostat does not have a heat anticipator ...what if it does ? I should be able to open it up and see inside if there is some thing to adjust ...that would be the heat anticipator, correct ?

does the transformer has 2 different poles ? like + or - ? does it matter to what screw I connect the wire coming from the thermostat and then from transformer to the valve ? if it does not then yes ..either diagram is ok. if it does then I need to know which wire goes where ....

he is telling me to connect reds together from thermostat and transformer and run abother cable from the other screw on the transformer to screw #2 on the valve (he calls it white) you are telling me to connect red from thermostat to the screw on transformer and run the other red from...

this is a 50 unit condo. the hot water is provided in the pipe. Problem is I have received another diagram from an electriciain ..he wants to : Red wire from Transformer to Red from Thermostat. The white wire from transformer to screw marked "2" on the valve. The other thermostat wire (I...

thanks. so I shall connect the following way ?

I do not think so the black was used at all - it is heat only thermostat. I have put new thermostat. I also think 1 wire from transistor is missing...normally tranasistor should have 2 wires correct ?

I am adding the wiring instructions...there are 2 t-formers though ...2 zones ?

it is a Taco 571-2 <-- (one way)

I have a problem to connect the thermostat/transistor wires to upper part of the zone valve (the picture with a red circle). I needed to replace the valve as it was leaking water. Now the new valve is on and the new cap is on ..however the wires are still dangling there ;-)) There is one wire...

the problem is in 5 stories 50 unit condo. basically the zoning valve is leaking from underneath the piston and I am unable to turn on heating (water). I suspect the part needs to be replaced. anybody knows approximate cost for parts and labour ? Chicago, IL...

yep - all working just fine, fixed it last nite - thanks for the help. the box is all cramed with wires though. got another project ...previous owner forget to put regular power outlets in the bathroom ..there are just 2 switches for lite and ceiling fan..so i will need to put GFCI and jump the...

Ok got it. Yes. This is what I did last time .. I attached all neutrals to B and D and then I attached hot from the fan to F. then once I flipped the braker I heard the alarm sound. The part of the outlet that is connected to the yellow wire is live only when I flip the switch on the wall. Ok so...

>

Ok. I will replace the wire ...do u have any input on how to connect the outlet? Thanks

Ok so let's bring it up to code. I realize that in case of fire insurance will deny my claim as the wiring is not up to code. Would u advise what cable to use and how to wire the thing? Thanks a lot

would you please offer advise how to properly wire the outlet ? thanks

. the cable Romex SIMpull 25 ft. White 14/2 NM-B Cable-28827421 at The Home Depot works just fine without metal tubing covered in insulation in TX (attic area). I see no reason it will not work here. all it will support is just a fan

my problem is the following. I would like to add hot/neutral/ground wires to an existing outlet to power ceiling fan. i have already run the romex cable now i need to properly connect it in the outlet. the outlet is the following. it used to have one bridge broken. one bridge not broken. part of...

Here is a situation with my AC unit (fan outside the house). The average temp outside is 30 degrees. I keep temp inside the house at 74 degrees constant. I do not have any pre-programmed time schedule when temp should go up or down .. If I leave the house the temp drops top 61 and then the...