Search results

:agree: I would not caulk the bottom edge of the overlap. I would caulk all the vertical seams, cracks and splits in boards. I would scrap all the old caulk from where the boards overlap. Moister that does get under the overlap is trapped if you caulk it and that will cause rot. The wall are...

Just a closing follow up. Switch is in and working beautifully. The Orange Apron guys didn't have one. The link I saw on G:(:(GLE, for HD, was misleading. The switch I got at the fan store was a Zing Ear but a 208 and that number was on 3 different switches. The store's # respectfully for...

Back in 2013 a few bronze plaques were stolen from Alpine, CA veterans cemetery...

I found a link for switch (shunt) patterns for the Zing Ear switches. The 268s6 looks like the one I need. Take note; the rotation pattern is L-3-1-2 and the shunt pattern it is L = Off high = L-1 med = L-2-3 low = L-3 Just like you said. You knew the answer I just had to feed you enough...

I think I saw one of those in my search but wasn't sure about the shunting pattern. I went to a local Ceiling fan store yesterday. I ordered the double stack switch for $11. I also found the switch at SwitchCo in Lubbock,Texas Friday afternoon but they already closed for the weekend...

Thanks. I think you're right about the transformer. I got that term from the side note in the first picture I posted in regards to the switch shunting. But the more I look into this I have seen it referred to it as a capacitor. The switch I need for medium speed has to simultaneously...

I'm thinking the 1st thing I should have done was identify the Fan. Sears. But did Sears make it or just cone it? Off on another search and destroy mission. Sears has a parts list but parts not available.:(

So you think the transformer changes the wattage? Here is some photos

You asked!!! , , , , , , , , , , , , , , , , , , , , , , , , , , Put Your sunglasses on = = = = = = = = = = = = = = =

I'll check it out. I could just put a new fan in but you know the old saying. " they don't make things like they used to. Seems to all be crap." Fixing this one is that need to tinker. keeps me out of trouble. The part that concerns me is how the switch works in conjunction with the...

I have this ceiling fan and the pull chain light switch broke. Not a problem. That switch is pretty common. The 3 speed fan switch is my concern. The plastic threaded end that holds it to the housing is broken. It works in conjunction with a small transformer. I don't think a standard 3...

Problem Solved.:thumbup: NO more LEAKS. . . . . . . . . . . . . . . . . . . . . . . . .It's on it's way to Mexico Put it on craigslist and was gone the next day

I just read this entire thread. Very interesting but Then you jumped it to a new thread in plumbing with out a link. So Here's a link http://www.houserepairtalk.com/showthread.php?t=21120

Thanks. I found the pipe and fixed THAT leak. Filled it up today and found 2 more I plugged them with screws for now. Termites are eating holes. Spent several hours today digging out foam. still have more leaks. :( I'll post some pictures later. I'm pissed and tired. This trail of...

Thanks for the help. HD has the pipe. It's called flexible spa pipe and it's pvc.

Found leak in my HotSprings Spa. What's the best way to clean off the foam on pipe. Where do I get that type of pipe. Fittings look like standard sch 40 PVC Link to thread on same topic http://www.houserepairtalk.com/showpost.php?p=156492&postcount=10

I used a screw jack and some lumber and pushed the spa over. Pulled off the panel and started digging. :banana::wavingflag::banana: Found a pin hole in the middle of a 1-1/2" tube. SO!! Where do I find this type of pipe? I was told I can use sch 40 PVC fitting and hot shot pvc glue...

Well!! I'm gonna try and tear into this spa. I just called the local hotspring dealer. He did mention removing the side panels but did not elaborate on how. So I thought I would give it a go. I started to just peel the siding off and discovered That the whole side will come off as a unit. I'll...

Thank you. I did try a poolspa forum but had trouble getting an account so I could post. I'll take a look at he one you mentioned Also Thanks. That was one answer I was looking for. But you say if it's a seal that seal is behind the tub wall like an overflow gasket on a bathtub. So I still...

I have a Hot Spring Spa Envoy 2006 M# KK3H1550. Leaking from bottom of side panel. No leakage inside the equipment area. I did drain the spa in stages until it stopped leaking at the small jets at calf level in captains chair. So am I going to have to jack up and block the spa and dig...