Today I installed a new ceiling fan.When I removed the old one there were 2 hot wires and one neutral.One of the hot wires was going through the double switch and was only hot when the switch was on.After reading the instructions for the new ceiling fan I discovered that I need only one hot and one neutral wire plus the ground attached to the base of mounting bracket. I decided to use the hot wire going through the switch and leave the other one alone.Now after I finished the installation my ceiling fan is working,but in my kitchen the light is acting very weird.When I turn on the switch it lights up for a brief moment and then dims.The switch that controls the fan and the kitchen it is a double switch.The kitchen light is LED light.Also the light on my balcony is not working at all,but it is controlled by separate switch.I checked the brakers,but they're ok.
Your suggestions will be appreciated.What I'm doing wrong?
Your suggestions will be appreciated.What I'm doing wrong?