Can DW1803 is used in DWD115K

Discussion in 'Tools' started by q0987, Apr 18, 2014.

  1. Apr 18, 2014 #1

    q0987

    q0987

    q0987

    Member

    Joined:
    Mar 4, 2014
    Messages:
    10
    Likes Received:
    0
  2. Apr 18, 2014 #2

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,891
    Likes Received:
    3,117
    No, sorry I didn't see that earlier, You will need a 1/2 " drill.
     
  3. Apr 18, 2014 #3

    q0987

    q0987

    q0987

    Member

    Joined:
    Mar 4, 2014
    Messages:
    10
    Likes Received:
    0
    Hello nealtw,

    Based on a review from amazon "For wood, OSB, fiber cement board, plywood, sheetrock, plaster, fiberglass, MDF, and anything else the TCT hole cutters like the ones from Blue Boar are a better deal if you plan to cut more than one or two holes", it seems that the hold saw from dewalt is not good for prywood.

    May you give me some suggestion on buying a hole saw which is decent quality and can be used with my 3/8" drill?

    Thank you
     
  4. Apr 18, 2014 #4

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,891
    Likes Received:
    3,117
    I wouldn't bother with the light stuff, but then I would use a skill saw set so it would only cut 1/2" deep and get it done.
     
  5. Apr 18, 2014 #5

    Wuzzat?

    Wuzzat?

    Wuzzat?

    Well-Known Member Sponsor

    Joined:
    Jan 20, 2010
    Messages:
    2,471
    Likes Received:
    175
    These parts are expensive and you may use them only once.

    I'd look for ways to use tools for this job that are more versatile and commonplace, or rent the tools.
     

Share This Page