Carrier Programmable Thermostat issues

Discussion in 'HVAC' started by divy, Dec 16, 2011.

  1. Dec 16, 2011 #1

    divy

    divy

    divy

    New Member

    Joined:
    Dec 16, 2011
    Messages:
    1
    Likes Received:
    0
    We have a Carrier Programmable Thermostat. Before it was easy to heat the house, just by pressing the up or down buttons. Some time later, that changed and it wasn't as easy to heat up the house. Now I had to do the "7 day" set up for the thermostat and sometimes that works, but sometimes it doesnt.

    I have tried reading the manual, to no avail.

    Is there a way to reset everything? Is it possible for this thermostat to just stay at a constant temperature without all the fuss of different times/days schedule etc etc?

    My thermostat looks like this: http://www.residential.carrier.com/products/controls/premium.shtml

    Right now I have a current temp of "61".
    I set my desired temps as 90 cool/ 75 heat.
    Mode: Heat.
    Fan: Auto.
    Hold: on

    still nothing...
     
  2. Dec 16, 2011 #2

    hvactechfw

    hvactechfw

    hvactechfw

    Professional

    Joined:
    Mar 26, 2011
    Messages:
    66
    Likes Received:
    1
    yes, simply set to desired temp and push hold. It should not move off of that setting unless someone moves it. If the furnace does not reach the set temp then that is a different problem all together.
     
  3. Dec 16, 2011 #3

    paul52446m

    paul52446m

    paul52446m

    Well-Known Member

    Joined:
    Oct 7, 2010
    Messages:
    435
    Likes Received:
    1
    A lot of stats will only stay on hold until you get to the next programmed time ,
    then it goes back to the program setting If you don't want a programmed stat then changed it out. Paul
     

Share This Page