My 2008 Casablanca Ventura fan has died. The W32 wall switch works, but neither fan or light work. The RMM circuit board says RMM4. It has 2 power resistors. One says 8W3K and, in circuit, measures 4k. The other one looks identical, but is white possibly from overheating, and has nothing legible on it. It measures 400 ohm (in circuit). Information from fan web sites indicate that Casablanca stopped selling this Intellitouch pulse code controls and changed to RF, so if I need to buy a new board, I must change the switch as well for $140. Does anyone have a schematic or any values for the discrete components on this controller? It may be more than that resistor, but if not, I would rather replace that than the entire system.