celling fan remote

Discussion in 'Electrical and Wiring' started by david542, Feb 17, 2013.

  1. Feb 17, 2013 #1

    david542

    david542

    david542

    Member

    Joined:
    Feb 29, 2012
    Messages:
    19
    Likes Received:
    0
    I am trying to hook up hunter universal fan and light remote control model # 21784. When I hooked it up the way it shows nothing works. I put all the black to gather and the white and get on the motor to work but not the lights I have only one switch that the power comes from. I been trying to work on this for 2days and had no luck yet. Any help would be greatly apprecated.
     
  2. Feb 17, 2013 #2

    kok328

    kok328

    kok328

    Well-Known Member

    Joined:
    Nov 20, 2007
    Messages:
    2,755
    Likes Received:
    249
    Did you wire in power to the lights (usually a red wire)?
    Did the fan & lights previously come on at the same time when you flipped the switch?
     
  3. Feb 17, 2013 #3

    david542

    david542

    david542

    Member

    Joined:
    Feb 29, 2012
    Messages:
    19
    Likes Received:
    0
    I have the Red wire hooked to blue wire thats says lights. No, I just put replaced an old fan with a new one.
     
  4. Feb 18, 2013 #4

    Fireguy5674

    Fireguy5674

    Fireguy5674

    Junior Member

    Joined:
    Dec 15, 2012
    Messages:
    184
    Likes Received:
    35
    I remember having issues with a Hunter Fan remote wiring diagram. Just don't remember the exact issue. Where did you purchase your remote? I tried to look up #21874 and #27184 but could not find anything. I found a #27183. Anyway, need a little more info to help much I am afraid. What wires do you have and what did they tell you to do?
     

Share This Page