Supershine!
New Member
What's the best way to drill 1/4" diameter holes in exterior natural stone?
I'm installing an aluminum railing and I need to drill about 32 holes for the posts which will be fastened with wedge anchors - 4 per post. The stone is by Banas Stones and is a sandstone tile 1" thick on a mortar bed on a concrete foundation.
Regular drill with a diamond bit? Hammer drill with a masonry bit? Rotary hammer drill with a masonry bit? I got alot of conflicting advice.
Thanks!
I'm installing an aluminum railing and I need to drill about 32 holes for the posts which will be fastened with wedge anchors - 4 per post. The stone is by Banas Stones and is a sandstone tile 1" thick on a mortar bed on a concrete foundation.
Regular drill with a diamond bit? Hammer drill with a masonry bit? Rotary hammer drill with a masonry bit? I got alot of conflicting advice.
Thanks!