GE Profile Ref Condenser Fan Wiring

Discussion in 'General Appliance Discussion' started by erolo, Apr 25, 2013.

  1. Apr 25, 2013 #1

    erolo

    erolo

    erolo

    New Member

    Joined:
    Apr 24, 2013
    Messages:
    4
    Likes Received:
    1
    I need to directly connect the replacement condenser fan to the 12V DC circuit. The ref circuit connector came off and I can't reconnect.

    Replacement fan has 4 wires, Blue/Red/Yellow/White. The ref circuit has 3 wires, Red/Orange/White.

    Any suggestions on how to match the wires?
     
  2. Apr 25, 2013 #2

    jeff1

    jeff1

    jeff1

    Well-Known Member

    Joined:
    Mar 17, 2006
    Messages:
    465
    Likes Received:
    34
  3. Apr 25, 2013 #3

    erolo

    erolo

    erolo

    New Member

    Joined:
    Apr 24, 2013
    Messages:
    4
    Likes Received:
    1
    GE profile Ref PFS22S1BSS

    Panasonic UDQT24LG3 Fan

    Thanks for your reply
     
  4. Apr 25, 2013 #4

    jeff1

    jeff1

    jeff1

    Well-Known Member

    Joined:
    Mar 17, 2006
    Messages:
    465
    Likes Received:
    34
    That may be PFS22SISBSS

    Fan motor does show an 4 wire connector.

    [​IMG]
    Condenser fan motor

    I found a diagram, but the forum won't let me up load it.....I will post tonight once I get home.

    jeff.
     
  5. Apr 26, 2013 #5

    erolo

    erolo

    erolo

    New Member

    Joined:
    Apr 24, 2013
    Messages:
    4
    Likes Received:
    1
    Thank you Jeff. I look forward to your response.
    Erol
     
  6. Apr 26, 2013 #6

    jeff1

    jeff1

    jeff1

    Well-Known Member

    Joined:
    Mar 17, 2006
    Messages:
    465
    Likes Received:
    34
  7. Apr 26, 2013 #7

    erolo

    erolo

    erolo

    New Member

    Joined:
    Apr 24, 2013
    Messages:
    4
    Likes Received:
    1
    Thanks Jeff. All looks good!

    Erol
     
    nealtw likes this.

Share This Page