I've got a GE model PDS22SCRBRSS that has a condenser fan motor that won't operate. My scenario is exactly the same as the one that posted on 7-1-2008. This too is a dc fan motor. I originally replaced just the fan motor, but the new motor did not work. After reading the post fron 7-1, I ordered a replacement main board and a new fan motor. I have not been able to operate any of these fan motors with an independent 12 volt power source. I installed the new motor and board today, but the motor still does not work. I have 13 volt dc down to the plug connector. I have even gone so far as to pull apart the plug to confirm that I am getting a good connection. Any suggestions?