Help Installing a window in a brick opening

Discussion in 'Windows and Doors' started by melindalf, Oct 4, 2010.

  1. Oct 4, 2010 #1

    melindalf

    melindalf

    melindalf

    New Member

    Joined:
    Oct 4, 2010
    Messages:
    1
    Likes Received:
    0
    I need help with a window project. We are tearing out old metal jalousy (SP??) windows from a brick porch/sunroom. There is no wood surround as the metal window angled frames were cemented in place. We tried to install a vinyl replacement by flat framing in to size with treated 2x4s using the metal surround of the old window as a "stop" for framing Does any one have suggestions for the easiest way to put windows in brick? (8 inches thick, flat no angled "sill")
     
  2. Oct 5, 2010 #2

    budro

    budro

    budro

    Well-Known Member

    Joined:
    Aug 8, 2010
    Messages:
    77
    Likes Received:
    1
    use shims to install the windows. then use molding on inside and outside to hold window in place. budro
     
  3. Oct 8, 2010 #3

    NLDawg72

    NLDawg72

    NLDawg72

    New Member

    Joined:
    Oct 8, 2010
    Messages:
    2
    Likes Received:
    0
    I have a brick ranch house made in the mid 50's. My dad and I came across what I believe to be the same problem. Our solution was to build the frame for the new replacement vinyl windows ourselves. We just got pressure treated decking 2X4's. We had to rip them down to 2X3's so they would fit between the drywall and the brick. Note: You may need to get a smaller window, but in our case they fit like a glove. Also, get some insulation to stuff behind the ripped pressure treated 2X3's. After installing the window just add some vinyl trim around the outside and inside then caulk it up. More, we had to make new window sills in my case, because the old sill were made of tile and some broke when removing the old aluminum frame via crowbar :) I hope this helps.
     

Share This Page