Hi there, I have three outlets that have the top switched and the bottom constant. The switched outlets are controlled by a single pole switch that is part of a 3 gang box. I have Lutron Radio Ra2 throughout the house and would like to take the power from the switch and use it to power a 6 button keypad. My issue is this. There is just a 2 wire with ground going to the switch ocation. So, if I hook up the 3 wires from the wall box to the corresponding wires on the keypad...The keypad lights up and can be used to send information for scenes, but, the switched part of the outlets will not have power. In contrast. If I twist together the black and white in the box where the switch is...the outlets work but now I cannot hook up my keypad. This is very frustrating and considering that the keypad was $400. I really need to make this work. Please help!