Hi have an HSM25gfta. I have noticed that the icemaker is only dispensing crushed ide. Now while it might be the solenoid, i have moved the little plastic switch into the up position at the back and it dispenses cubed for a while. I have noticed that the underside of the icemaker has frozen ice on it. Almost as if water ran down and froze on the bottom, or maybe condensation and it froze. While this freezing is happening inside the Ice bucket some of the ice is bunched up and frozen together. I suspect the CRUSHING im seeing is not the solenoid, but maybe the fact that the ice is not flowing freely and is bunched up and frozen together as it goes to the dispenser and the unit then crushes it. I thought i read somewhere that there is a cycle that causes a freezinfg of the ice and a slight melting. Is that right? Maybe it is that part that is sticking and causing more melting? I should get a technician out and probably will but was curious if this sounds familiar.
Thank you
Thank you