Help Support House Repair Talk:
bud16415
- Messages
- 7,154
- Reaction score
- 2,865
Latest activity Postings About
-
-
bud16415 replied to the thread Relocating water lines.What type of shower are you planning. If it is a molded one piece or three piece there may be room for the PEX and the bends. If you are... -
bud16415 replied to the thread SIZZLE SIZZLE POP! Water Heater May Need To Go...............Looks like it is time for a new water heater. It looks like you are all copper and soldered right up to the tank. I would look at the...
-
bud16415 replied to the thread Lowes won't price match their own prices!!!!! Really.To the OP. This is a game they play and they make the rules and we get to follow them like it or not. We as consumers get two choices...
-
bud16415 reacted to condoowner's post in the thread Cloudy and muddy water from well after house plumbing work with
Like.
I believe the pump is in the well (its a Grundfos 10SQ05-160). -
bud16415 replied to the thread Cloudy and muddy water from well after house plumbing work.Is your pump in the well or above the ground? Above the ground will work like you describe if the foot valve is not working.
-
bud16415 replied to the thread Cloudy and muddy water from well after house plumbing work.My guess is it will slowly clear up but might take a bit more time. At my old house I had a shallow well with a huge amount of...
-
Vinyl siding even with the thin fan-fold "insulation" they'd install behind it will add no significant R-value to the walls. Sealing up...
-
bud16415 reacted to BvilleBound's post in the thread GFI equipment ground in old circuit? with Like.
This is incorrect. "Wire shielded" cable is not required for an AFCI / GFCI receptacle. Read the details on the Leviton or Eaton...
-
A true redneck would prolly have reused an old automobile radiator hose. I have a triple basin sink that was a bear to get all the...
-
Someone with some up to date code knowledge check me here please. If installing a AFCI receptacle the circuit from the panel to that...
-
ok now I understand, thanks for the convincing reasoning.
-
bud16415 replied to the thread redneck p-trap.There is the right way and the wrong way to do most of this stuff and then the do what you have to do sometimes way. Dealing with old...
-
Thank you all very much for your responses! I knew that there was a gap in my original thinking, which is why I brought the question...
-
bud16415 replied to the thread redneck p-trap.I was able to follow link and repost your picture. It looks ok to me it is doing the job and not leaking and is easy to take apart.
-
-
bud16415 replied to the thread redneck p-trap.Welcome to the forum. Your photo link doesn't seem to be working for me. If you can just use the insert image in the tool bar it...
-
-
Loading…
-
Loading…
