Took over a rehab and the electric piece seems to be straight up screwed. May or may not matter but let me preface by saying the home was originally wired aluminum. The service panel (Siemens) was replaced and inspected and it "appears" numerous legs were added/replaced with copper but most everything "in-wall" is still ALR.
When I took over nothing was labeled and all of the switches/outlets were gone but they did have 80% of the boxes pigtailed out with AlumiConn connectors.
So here is my first dilemma, several of the fixtures (bath lights/fan, DR chandelier) have power to them but will not turn on.
Soooo is my logic correct in thinking there is a missing/disconnected common somewhere in the circuit? And if so, how would you start to trouble shoot it?
When I took over nothing was labeled and all of the switches/outlets were gone but they did have 80% of the boxes pigtailed out with AlumiConn connectors.
So here is my first dilemma, several of the fixtures (bath lights/fan, DR chandelier) have power to them but will not turn on.
Soooo is my logic correct in thinking there is a missing/disconnected common somewhere in the circuit? And if so, how would you start to trouble shoot it?