Hello everyone! I just joined the forum so I could get your feedback and recommendations on the best way to approach insulating my 1,600 sqft metal building. I just purchased the commercially zoned property so I could turn this shop into the new storefront/studio for my business. I'm located in Bay St Louis, Mississippi down on the Gulf Coast with plenty of heat and humidity so I'd like to do this right and as affordable as possible. I'll be doing it myself with assistance from friends when necessary. There are some holes that have been cut out in the past that I will be sealing off, a pair of exhaust fans up at the top that I'll close off, and a Goodman package AC unit that will be installed outside with return air near the floor and the duct blowing out higher up pointed at the garage doors. I will be removing one of the garage doors and building in window/door front to let in natural light.
Here's some photos for a 360 view. The ceiling is already insulated, though I'm not too familiar with metal building insulation and I'm not sure how good it is, only that it's noticeably cooler than standing near a wall in the shop.
I have a lot of home renovation experience so feel free to share your opinions and recommendations in a higher than elementary format lol. Thanks in advance!
Here's some photos for a 360 view. The ceiling is already insulated, though I'm not too familiar with metal building insulation and I'm not sure how good it is, only that it's noticeably cooler than standing near a wall in the shop.
I have a lot of home renovation experience so feel free to share your opinions and recommendations in a higher than elementary format lol. Thanks in advance!