TXDIYRookie
Member
- Joined
- May 31, 2006
- Messages
- 8
- Reaction score
- 0
I just had a hot water heater replaced, I tried just replacing the thermal coupler as suggested on this site. (It was a nice try!) Anyway, all of my faucets are flowing fine except for one lavatory sink. When I first turned the hot water to this faucet on the water was "rusty" a little air came through the line and then the flow went to a trickle. It is this way now for both the hot and cold water.
Thanks,
Kim
Thanks,
Kim