Hi my name is sean and I have a bit of a problem a piece of elbow pipe sprung a pin hole leak in my drywall a few days ago I just cleared out the room and fixed the leak but it ruined my drywall and my carpet in the entire room, when I pulled up the carpet and padding I found that there was some mold on the sub floor and that the water had raised part of my floor in the upper left hand corner slightly there is also mold on the 2X4 where the problem had started I was hoping that someone in here could help me with both these problems I have read a few different ways to get rid of mold but none of them sounded that promising, does anyone know if there is a way to like maybe seal it and stop it from spreading or any ways to clean it someone told me vinegar maybe? please any help or input would be great the mold is maybe 1 foot by 1 foot if that on one part of my sub floor and then on the 2X4 its about half way up the wall also if anyone has any tips on how to get my floor level again that would be great as well thanks everyone I look forward to seeing the responses!!!!