Re attaching flagstone in walkway

Discussion in 'Bricks, Masonry and Concrete' started by bards0985, Jun 19, 2013.

  1. Jun 19, 2013 #1

    bards0985

    bards0985

    bards0985

    New Member

    Joined:
    Jun 19, 2013
    Messages:
    1
    Likes Received:
    0
    Hey folks, new to the site here and was looking for advice to re attach three pieces of flagstone that have come loose from my walkway . I have attached photos . I was thinking I would first chip out the old mortar . Second clean and wire brush and loose material or dirt away . Third apply a concrete block adhesive and then lay the flagstone back down . 4 th finish up the joints with a mortar joint caulk . Can anyone else offer a different approach or some things to pay attention to ? Thanks

    image-560352220.jpg

    image-12575760.jpg

    image-2746825689.jpg
     
  2. Jun 19, 2013 #2

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,895
    Likes Received:
    3,117
    You need even support across the stone or it will break, I would use mortar.
     

Share This Page