debbiejans
Member
- Joined
- Jul 7, 2022
- Messages
- 5
- Reaction score
- 3
Hi all, we have a 1960s cottage that we are finally updating. So far I have replaced a couple of windows. I am at a loss as to how to go about finishing the window that is located in the shower. I know! Brutal, but the natural light and ventilation are a must. I'm not sure if it's visible, but the row of tiles on the bottom seem very high in comparison to where the window is installed. In order to prop it up more I would have to rebuild the entire opening. Any suggestions on how to tackle this are greatly appreciated. I have a Dremel tool at my disposal if you think I should try to cut the tiles down some.