Washer/Dryer Pedestal

Discussion in 'General Appliance Discussion' started by Griffithhouse, Aug 8, 2012.

Help Support House Repair Talk by donating using the link above.
  1. Aug 8, 2012 #1

    Griffithhouse

    Griffithhouse

    Griffithhouse

    New Member

    Joined:
    Jul 31, 2012
    Messages:
    2
    Likes Received:
    0
    Hello,

    My husband and I are having Whirlpool Duet washer and dryer delivered next week. We found a pair of pedestals for A LOT cheaper than reg price but not sure if they will cause issues, as the dimensions are not a 100% match.

    Our W/D call for a pedestal that is: H: 15.5 x W: 27 x D: 26.25

    The ones we are looking to buy are made for GE and are
    H: 15 x W: 27 x D: 28.75

    The height and width are fine but it would be sticking out in the back a bit (which I don't care about-as long as it fits). Does the washer/dryer need to snap into the pedestal or would it be ok?

    Thanks!
     
  2. Aug 9, 2012 #2

    jeff1

    jeff1

    jeff1

    Well-Known Member

    Joined:
    Mar 17, 2006
    Messages:
    465
    Likes Received:
    34
    Hi,

    The feet may not sit on the stands correctly...all you can do is measure the washer/dryer spacing between the legs ( L to R and back and forth ) and compare to the other stands.

    Most are bolted on or they use the legs to keep the units on the stands/pedestals.

    jeff.
     

Share This Page