farmerjohn1324
Well-Known Member
- Joined
- Aug 5, 2016
- Messages
- 963
- Reaction score
- 103
This is a tiny piece in between a vanity and bathtub, so I'm not worried too much about it looking bad. I cut it with a 7" grinder, and the edge is very jagged.
I know that I would usually use a tile saw, but some cuts require a grinder (this one didn't).
What do you think went wrong? Was the grinder too large? Maybe the blade was dull?
I know that I would usually use a tile saw, but some cuts require a grinder (this one didn't).
What do you think went wrong? Was the grinder too large? Maybe the blade was dull?