Hi guys,
Just curious is the resident experts on the board here could point me in the right direction concerning a project I'm working on...
I'm needing to use a routing with a Rabbet Router Bit to enlarge an existing hole by 22.2 mm in overall width and 1/2 inch in depth.
I would use a bearing at the bottom of the router bit to roll around the bore to keep the circle true.
I thought I had found a nice Rabbet Router Bit and Bearing Set that came with metric bearing sizes which would have enabled me to go in 9 mm (the hole needs to be 22.2 mm over all diameter so 9 mm in would be getting me cloe to my goal) at Mega-Rabbet Router Bit and Bearing Set but they are out of stock.
So, does anyone have any ideas on tools I can obtain to help me achieve the mark I'm trying to hit when enlarging the bore by 22.2 mm in overall width and 1/2 inch in depth?
Any ideas or suggestions would be appreciated, thanks!
Just curious is the resident experts on the board here could point me in the right direction concerning a project I'm working on...
I'm needing to use a routing with a Rabbet Router Bit to enlarge an existing hole by 22.2 mm in overall width and 1/2 inch in depth.
I would use a bearing at the bottom of the router bit to roll around the bore to keep the circle true.
I thought I had found a nice Rabbet Router Bit and Bearing Set that came with metric bearing sizes which would have enabled me to go in 9 mm (the hole needs to be 22.2 mm over all diameter so 9 mm in would be getting me cloe to my goal) at Mega-Rabbet Router Bit and Bearing Set but they are out of stock.
So, does anyone have any ideas on tools I can obtain to help me achieve the mark I'm trying to hit when enlarging the bore by 22.2 mm in overall width and 1/2 inch in depth?
Any ideas or suggestions would be appreciated, thanks!