bud16415's latest activity

Thanks all, for such a kind welcoming!! 68bucks; yes, I am of that fame. I got out of latex, and latex related products. So, now, I am...

I don’t know for sure but I bought a new charger to keep on my tractor over the winter. All my old chargers just pump out juice and are...

:welcome: We are a small forum so we may not answer as quickly, but we don't have all the drama of the big guys ether. I think you will...

As posted above. Take your cartridge that you suspect is bad to your neighborhood Ace Hardware along with the manufacture of your valve...

A old roofer I knew always swore by a product called "Tinners Red" paint. Doing a Google search shows several versions of it and also...

If it were mine and again as post above it isn’t. I have a Sunsetter Awning that rolls up all winter. We have one and it gives great...

"My dad used to say a guy driving a nail will put every one in at a slightly different angle whereas a nail gun they are all parallel...

A rare earth magnet may also help with finding a stud. Ive also seen people drill into the grout joint with a 1/8th concrete drill bit...

I have tried a lot of deck screws and found the Guard-Dogs to have a good strength to hardness ratio. They are also pretty easy to find...

That's very explanatory what you wrote above, Bud16415. Thanks for posting it. I've also read & heard framing nails versus screws...

SLIME is the best stuff. My rider was always going flat until I started to use Slime in it. I did have to add more Slime over the...

My friend had a scrap business and was always driving his skid steer over sharp metal and going thru tires all the time. He also used it...

Finding framing behind a finished wall is always a problem. It would be nice if when building walls where they know they are to be...

Hi I'm the OP on this tread. Look back at the link on my post #4. I haven't tried them but I like the idea for the surround issue. As...

Cabinetry wood screws and structural “deck screws” are two totally different categories as are the “drywall screws”. They are all kind...