Recent content by sjm1027

So your saying it could be one of the leads have been disconnected or corroded at the plug? Most likely on the outside of the house.

Yes it was the same generator

Thanks, I did check every breaker and they were all on.

Yes I have 240v output and I had it switched to 240

I live in Massachusetts and during the last blizzard we lost our power for 3 days. I have a Honda Generator 3500 watt portable on wheels. I rolled it out and connected it to a 220 outlet on the side of the house going to breaker box. Of course I disconnected my 200 amp service from the street...

I will look into the drill and plug as well, don't know it was an option. Thanks

Will start with JB Weld for now. Just waiting for a good time when drain won't be used.

Thanks, I will see if I can find it.

Thats what I am afraid of. I know I will need to replace it eventually. Anyone know about the rubber spray I have seen on TV? (I know, can't believe I am asking it) But they sprayed a screen door and made a boat out of it :) Anyway I am almost thinking of trying that too.

Actually that is a cobweb making it look like a crack. I went to Home Depot today and picked up the JB Weld. I will give it a try when my wife is out so the water isn't running. Appreciate your time. Thanks

I have a pin hole in my cast iron sewer drain pipe about 2 inches from the floor level. Very small and no water on the floor yet. Just a white mineral type line about 1/8 inches think. I know at some point I will need to dig up the basement floor and replace the pipe if I have a pin hole. BUT my...

thanks, I will do just that appreciate the help Steve

Hi, Having a problem with a bathroom ceiling, it's peeling in one area and when I started to scrape the paint I ended up with an area 10" x 6". Before I feather it out I would like to know if anyone thinks I am wasting my time and this will happen again? my plan is to make sure I have all the...