sjm1027
Member
- Joined
- Feb 18, 2008
- Messages
- 13
- Reaction score
- 1
I have a pin hole in my cast iron sewer drain pipe about 2 inches from the floor level. Very small and no water on the floor yet. Just a white mineral type line about 1/8 inches think. I know at some point I will need to dig up the basement floor and replace the pipe if I have a pin hole. BUT my question is, how can I fix this pin hole right now and maybe buy another 5 years if possible?
I added 2 pictures. No cracks only a pin hole in the pipe.
I added 2 pictures. No cracks only a pin hole in the pipe.
Last edited: