Aside from the obvious observations that it wouldn't look like other house in the neighborhood, are there any functionality issues with using epdm rubber as siding?
I have a 20 foot high, 32x64 box shaped flat roofed (epdm) house I am building. I am thinking to tack the siding epdm under the eaves and then tack it again at the sill in a 10x21foot strip, then tape the seams. After that I would cut out the window openings and lap seal the epdm to the vinyl window frame
Waterproof, tough, cheap, fast, little effort. Anything I am missing except for aesthetics?
View a walkthrough and a brief look (last few seconds) at the exterior here:
http://engineering.dartmouth.edu/~d30574x/other/MVI_5627.mpg
bb
I have a 20 foot high, 32x64 box shaped flat roofed (epdm) house I am building. I am thinking to tack the siding epdm under the eaves and then tack it again at the sill in a 10x21foot strip, then tape the seams. After that I would cut out the window openings and lap seal the epdm to the vinyl window frame
Waterproof, tough, cheap, fast, little effort. Anything I am missing except for aesthetics?
View a walkthrough and a brief look (last few seconds) at the exterior here:
http://engineering.dartmouth.edu/~d30574x/other/MVI_5627.mpg
bb