swimmer_spe
Well-Known Member
- Joined
- Apr 29, 2015
- Messages
- 944
- Reaction score
- 175
Our house draws in lake water. A visual inspection turned up that it is not sitting in the silt, but may need a cleaning.
How can I clean it such that:
1) I do not need to take it off or out of the water
2) pump does not lose prime
3) the sediment/stuff that is removed is not sucked into the pump.
I am a scuba diver and the foot valve is in about 6 feet of water.
How can I clean it such that:
1) I do not need to take it off or out of the water
2) pump does not lose prime
3) the sediment/stuff that is removed is not sucked into the pump.
I am a scuba diver and the foot valve is in about 6 feet of water.