Corroding Fence... Dog issue...

Discussion in 'General Home Improvement Discussion' started by Junto, Oct 29, 2013.

  1. Oct 29, 2013 #1

    Junto

    Junto

    Junto

    Junior Member

    Joined:
    Oct 6, 2008
    Messages:
    3
    Likes Received:
    0
    OK... I'm looking for some suggestions for dealing with a corroding wrought iron fence, which is exclusively due to a 12 yr old cocker which my wife loves more than me. (Although I like the dog, and not having him around would free up considerable more room in the dog house for me, if he became missing, my wife would still consider me a prime suspect.)

    I have taken this section of the (see pics) down to bare metal twice, treated it with "Ospho" to encapsulate the remaining rust, and have painted it with a glossy black oil-based enamel. The dog still wins the fight.

    From the photo, you can see that there isn't a lot of metal left. I'm afraid that I'm going to have to cut out this section and corner post and weld in a replacement that I'm not confident I can find. If there were some sort of thin shrouding material I could apply, I'd like to try it. Would Bond-o work on something like this?

    Any suggestions would be appreciated.

    Thanks.

    Rick

    20131029_141720(1).jpg

    20131029_141706(1).jpg

    20131026_161258.jpg
     
  2. Oct 29, 2013 #2

    nealtw

    nealtw

    nealtw

    Contractor retired

    Joined:
    Nov 4, 2010
    Messages:
    23,892
    Likes Received:
    3,117
    Square tubing is available, your not going to beat the rust, when it is set in concrete it should be hot dipped galvinized.
     
  3. Oct 30, 2013 #3

    DFBonnett

    DFBonnett

    DFBonnett

    Retired decorating contractor

    Joined:
    Apr 17, 2012
    Messages:
    208
    Likes Received:
    61
    Minwax makes a 2 part polyester filler. You could sand down as much as possible, pack the Minwax into the holes to fill the cavity as much as possible, sand smooth, prime the bad areas with Rustoleum Rusty Metal primer, then top coat with Rustoleum black in the gloss level of choice. I've done similar repairs in the past and you'll likely have to touch up every couple of years but the repair is solid. Welding in a new piece would be better, but is considerably more involved requiring more equipment and an additional skill set.
     
  4. Oct 30, 2013 #4

    oldognewtrick

    oldognewtrick

    oldognewtrick

    Administrator Staff Member Admin Moderator

    Joined:
    Jul 26, 2009
    Messages:
    10,811
    Likes Received:
    1,433
    Electric fence...he'll get the idea sooner or later...
     
  5. Nov 1, 2013 #5

    CallMeVilla

    CallMeVilla

    CallMeVilla

    Well-Known Member

    Joined:
    Feb 9, 2010
    Messages:
    1,651
    Likes Received:
    594
    Your best bet is an electric collar with an in-ground wire that establishes the boundary. I have done this with a very stubbonr coon hound ... it worked the FIRST TIME. Best money I ever spent because the neighbors were fixing to put out a contract on the hound.

    http://www.petco.com/product/12328/... Dog Basic In-Ground Pet Fencing System-12328

    You bury the wire where you want them to stop. The wire traces back to the controller in the garage. With the collar on the dog, it will mildly shock the dog as it gets closer to the boundary ... and really lets him have it when he gets to the boundary.

    Even stupid dogs like yours will get the message.

    Unfortunately, there is no thermonuclear setting on the collar which could vaporize the dog you don't like.

    SHOCKED 1.JPG
     
    Fendy likes this.

Share This Page