Crown Moldings

Discussion in 'Walls and Ceilings' started by tath, May 4, 2009.

  1. May 4, 2009 #1

    tath

    tath

    tath

    New Member

    Joined:
    May 4, 2009
    Messages:
    1
    Likes Received:
    0
    I'm in the middle of a kitchen remoldel - the cabinets go to the ceiling with crown molding. We want to have crown molding arounf the room . Any suggestions of transition these 2 without paying for a custom set up to match the 2 crowns perfectly ???
     
  2. May 4, 2009 #2

    handyguys

    handyguys

    handyguys

    Well-Known Member

    Joined:
    Feb 22, 2008
    Messages:
    815
    Likes Received:
    2
    The cabinet manufacturer can supply you with matching pre-finished crown usually. Its pretty spendy (expensive).
     
  3. May 6, 2009 #3

    glennjanie

    glennjanie

    glennjanie

    Well-Known Member

    Joined:
    Mar 1, 2006
    Messages:
    2,990
    Likes Received:
    4
    Welcome Tath:
    Appearently the cabinets already have the crown and you want to do the rest of the room to match, Right? The crown on the cabinets was probably prefinished but you can get a close match if you take a sample to Home Depot or other large store. It will not hurt to be just a shade off when you go past a corner; I'm sure you can take a close look at the crown you have and it will show different colors at corners. Its just the way the light hits it. Unless yours is an odd shape you can probably buy more at the same place that matches the stain.
    Glenn
     

Share This Page