Drip irrigation design

Discussion in 'Garden and Lawncare' started by Thomas529, Sep 8, 2018.

Help Support House Repair Talk by donating:

  1. Sep 8, 2018 #1

    Thomas529

    Thomas529

    Thomas529

    Junior Member

    Joined:
    Jun 8, 2013
    Messages:
    49
    Likes Received:
    4
    B65800E0-C7D6-451B-8DE7-DB2B46B1E475.jpeg Need help with drip irrigation design for 5-6 recently planted trees.
    Hopefully the photo will post with this.
    Note:
    Lower right is closest spikot that runs from well with 1 inch pipe.
    Approx 50 ft to cement drive where I jetted a 1 inch pvc under.
    Trees are noted and space between.

    Thanks for your ideas.
     
    Last edited by a moderator: Sep 9, 2018
  2. Sep 9, 2018 #2

    havasu

    havasu

    havasu

    Administrator Staff Member Admin Moderator

    Joined:
    May 21, 2010
    Messages:
    3,917
    Likes Received:
    73
    Don't overthink it. Do you have power to the line? I have 12 trees on two separate 3/4" PVC lines, that are reduced to 1/4" flexible tubing, that tie into micro bubblers. The trees are watered for 3 minutes, twice a day (in the evening) and these small lines supply all the water needed for the trees.
     
  3. Sep 13, 2018 #3

    Thomas529

    Thomas529

    Thomas529

    Junior Member

    Joined:
    Jun 8, 2013
    Messages:
    49
    Likes Received:
    4
    Glad yours is working out for you.
    I’m not overthinking it. I am trying to get input as to types of lines and sizes. No elect at water source.
     

Share This Page