I have a RO water filter system. I used to have a faucet with no Air Gap Hole just connect it to the Blue 3/8" Product Water Tubing; and the "Special red "SFC" tube from RO" directly connected to the "Black 3/8" Reject tubing to drain".
Recently the faucet broke. I bought a new faucet which come with an "Air Gap Hole" on it. I connected all three tubings as instructed. Then once a while, the Air Gap Hole generating a draining/bubbling sound which is quite loud and annoying.
My question is:
Can I connect the faucet just like the one with no Air Gap Hole. This mean only the Blue 3/8" Product Water Tubing connect to faucet; and the "Special red "SFC" tube from RO" directly connected to the "Black 3/8" Reject tubing to drain". Will this give me any problem?
Hope some experts can give me some advice. Thank you. (picture attached)
Recently the faucet broke. I bought a new faucet which come with an "Air Gap Hole" on it. I connected all three tubings as instructed. Then once a while, the Air Gap Hole generating a draining/bubbling sound which is quite loud and annoying.
My question is:
Can I connect the faucet just like the one with no Air Gap Hole. This mean only the Blue 3/8" Product Water Tubing connect to faucet; and the "Special red "SFC" tube from RO" directly connected to the "Black 3/8" Reject tubing to drain". Will this give me any problem?
Hope some experts can give me some advice. Thank you. (picture attached)