I got a really nice fiberglass entry door from Lowes. The installations was great! We bought fiberglass because we wanted to finish the inside in a faux wood grain. I looked at the spec sheet, and they suggested using a gel stain for the job. I bought a can of Minwax Gel Stain. I really like Minwax stains for my finishes. I have been refinishing antiques and making new furniture for more than 30 years, and have never had a bad refinishing job. Until now... The Minwax Gel Stain is nearly impossible to use. I tried direct application with a brush, and had to wip it off. I tried wiping on the stain with a cloth and had to wipe it off. I tried a dry brush application and settled on that. The directions on the can state that you are to wait 6-8 hours dry time. I waited 24, and started to put on the second drybrush coat. I started to melt off the original layer, and caused all sorts of problems. Some spots were clumpy and others the finish wore off to the bare. I thought, OK, I 'll wait 48 hours and put on yet another coat to smooth out the finish. Wrong -- it looked so bad, I decided to remove the whole finish. Oh Oh, nothing short of harsh chemicals would remove the finish now. Minwax recommends paint thinnner for clean-up, but that wouldn't even touch the finish now. So now the door has been primed and painted a nice color just darker than the walls. I won't be buying any more Minwax Gel Coat! Unless your a genie, I wouldn't recommend it to anyone.