Hi all, I undertook my first kitchen remodel and Im nearing the end.. just a final paint job and trim here and there. Very happy with everything, except this issue... There's a soffit above the cabinets that I framed up but unfortunately the duct inside of it took a drop at the end that I couldn/t do anything about.. so the soffit drops about an inch over the last 2-3 feet. I've attached pictures.. Im trying to figure out a decent way to trim up the gap. You can see the first two cabinets the gap goes from zero to about 1 1/8".. from there the rest of the cabinets sit at about 3/4". Any ideas would be wonderful!