Furnace Heat

Discussion in 'HVAC' started by wingman, Nov 16, 2010.

  1. Nov 16, 2010 #1

    wingman

    wingman

    wingman

    New Member

    Joined:
    Nov 16, 2010
    Messages:
    2
    Likes Received:
    0
    Looking to try and fix furnace heat problem.
    For starters furnace is about 20 years old, but is clean and in good shape.
    I replaced the fan motor in the summer and the a/c works fine. Now it is time to run the heat and it will not work.
    I am in auto mode furnace lights but fan does not come on. In manual mode fan is running and furnace will heat as it should. But I do not want to run fan all of the time.
    Any advise.........
     
  2. Nov 16, 2010 #2

    kok328

    kok328

    kok328

    Well-Known Member

    Joined:
    Nov 20, 2007
    Messages:
    2,755
    Likes Received:
    249
    Sounds more like a thermostat problem. Check your wiring and outputs from the thermostat.
     
  3. Nov 16, 2010 #3

    paul52446m

    paul52446m

    paul52446m

    Well-Known Member

    Joined:
    Oct 7, 2010
    Messages:
    435
    Likes Received:
    1
    Hi Paul here. Ok first of all do you have a electronic board or do you have a fan switch?If you want to send me pic. send them to paulm989@hotmail.com
    How many wires do you have coming from your blower motor and where are they going to? Your blower is running in the auto and air con. because that is a different speed than the heating speed, so tell me where the blower wires are going and what colors they are. Then we can get this problem fixed.
    Later Paul
     
  4. Nov 17, 2010 #4

    wingman

    wingman

    wingman

    New Member

    Joined:
    Nov 16, 2010
    Messages:
    2
    Likes Received:
    0
    I will look tonight when I get home from work to see the motor wiring.
    Than ks,
    Bill
     

Share This Page