5 years ago we had vinyl siding and gutters installed, now we're doing the roof. Looking at the attached pictures, it seems to me the gutters were placed too high. Even if the new roof eave edge was trimmed back from where it is now gutters seem high. When they did the job they wrapped a white aluminum coil around the fascia which had a gap in it. If this coil completely wrapped around the fascia I'd feel the wood was protected enough; if not then it seems the gutters would have to be taken down and a new coil installed. Or does it appear to the viewer that given all the other buildup around the gutter that the rainwater would not penetrate the old wood? (Hard to see i know from the below.) It has occurred to me that given all the other aluminum moldings up there it might be a major job to lower the gutters. We have had a dripping issue either from between gutter and fascia or from clogged slits in the waterfall gutter guard.