How do I restore damaged unistone?

Discussion in 'Bricks, Masonry and Concrete' started by Komodo, Jul 18, 2014.

  1. Jul 18, 2014 #1

    Komodo

    Komodo

    Komodo

    New Member

    Joined:
    Jul 18, 2014
    Messages:
    1
    Likes Received:
    0
    I had my concrete balcony rebuilt one month ago. Now on my driveway there is drops of concrete stains and small blobs of concrete, I used a pressure hose, 3000 psi and it now looks even worse. How do I restore my unistone?
     
  2. Jul 18, 2014 #2

    inspectorD

    inspectorD

    inspectorD

    Housebroken Staff Member Admin Moderator

    Joined:
    Dec 17, 2005
    Messages:
    4,503
    Likes Received:
    267
    First you want to call the company that created the issue. If you get no response, which sometimes happens, call the manufacturer of the stain product about how to remove. They have the solution as they make it.
    Next , it sounds like you get to pressure wash the rest of the driveway, because you actually cleaned the spot...now the rest needs to be cleaned.
    Stay away from any grinders, but a wire brush may help if used lightly.
    Good luck!!
     
    Komodo likes this.
  3. Aug 14, 2014 #3

    stadry

    stadry

    stadry

    Member

    Joined:
    Jul 27, 2014
    Messages:
    191
    Likes Received:
    45
    well ? what did the contractor do ? you can cover the stains - we use magic markers,,, doubtful the small ' blobs of concrete ' adhered to the point they'd resist the force of a small hammer & 5-in-1 tool

    can't imagine why anyone would've used a pres wshr but, then again, i can,,, have seen lots of diy errors that seem'd a good decision at the time :agree:
     

Share This Page