My hot water heater (gas) is located so that I cannot get by it to get to the rest of the room. To date we have been using a cut out in an adjacent room ( my office) which is now going to become a laundry room ( much better plan).
I am looking at 2 options , first I build a pocket door in the wall I referred to above. This is not the best option because it infringes on where I plan to locate my wash tub. The second option is to simply move the water heater about 2 feet to the right and back , so that from the main door to the furnace room I can walk straight into the furnace room.
Just to be clear I have a 32 inch bi fold door as the entrance to the furnace room and looking in:
1) the back of the room is directly ahead
2) to my left I have one side of the room and the furnace occupies the front 1/3 so its right at the doorway left edge.
3) on the right is the other wall where and on the other side is my future laundry room and this wall has a small access hole ( ouch my poor back) that gets me to the back of the furnace room
4) Once you take one step forward into the laundry room you cannot go any further the gas hot water heater is right there and no if you are skinny you cant slide by.
All I need to do is :
* turn off the gas
*disconnect one union on the gas line
* Cut the copper line on the outlet side of the hot water heater
* Cut one ABS plastic vent pipe
* disconnect the power to the gas water heater
Then I can slide her over and back
Problem is what does the code say? Do I need a license gas fitter , can I shorten the length of the ABS vent line, can I add an elbow and a 28 foot straight extension and reconnect myself, Do I have to call the gas company?
Why do I need to get to the back of the room? Well to service the plastic drain hose, the furnace craps out if it cannot draw a vacuum, also I use this area for safe storage for example that piece of glass I want to keep away from the kids.
Why a pocket door, hey its a great opportunity to learn something new without risking much, then I can make one where it would really stand out.
I appreciate your help
I am looking at 2 options , first I build a pocket door in the wall I referred to above. This is not the best option because it infringes on where I plan to locate my wash tub. The second option is to simply move the water heater about 2 feet to the right and back , so that from the main door to the furnace room I can walk straight into the furnace room.
Just to be clear I have a 32 inch bi fold door as the entrance to the furnace room and looking in:
1) the back of the room is directly ahead
2) to my left I have one side of the room and the furnace occupies the front 1/3 so its right at the doorway left edge.
3) on the right is the other wall where and on the other side is my future laundry room and this wall has a small access hole ( ouch my poor back) that gets me to the back of the furnace room
4) Once you take one step forward into the laundry room you cannot go any further the gas hot water heater is right there and no if you are skinny you cant slide by.
All I need to do is :
* turn off the gas
*disconnect one union on the gas line
* Cut the copper line on the outlet side of the hot water heater
* Cut one ABS plastic vent pipe
* disconnect the power to the gas water heater
Then I can slide her over and back
Problem is what does the code say? Do I need a license gas fitter , can I shorten the length of the ABS vent line, can I add an elbow and a 28 foot straight extension and reconnect myself, Do I have to call the gas company?
Why do I need to get to the back of the room? Well to service the plastic drain hose, the furnace craps out if it cannot draw a vacuum, also I use this area for safe storage for example that piece of glass I want to keep away from the kids.
Why a pocket door, hey its a great opportunity to learn something new without risking much, then I can make one where it would really stand out.
I appreciate your help