Laminate Wood Flooring

Discussion in 'Flooring' started by Cody84, May 2, 2012.

  1. May 2, 2012 #1

    Cody84

    Cody84

    Cody84

    Member

    Joined:
    Apr 14, 2012
    Messages:
    9
    Likes Received:
    0
    Hello,
    I just bought 300 sq. ft. of laminate flooring for my living room. After pulling up all the carpet there is a spot near the door that was apparently tiled sometime because there is still a layer of thin set on the cement. I want to lay laminate flooring over the entire living room. How do I get the thin set up so that it is level with the rest of the room?
     
  2. May 2, 2012 #2

    tilemandan

    tilemandan

    tilemandan

    Member

    Joined:
    Apr 25, 2012
    Messages:
    23
    Likes Received:
    2
    The best way would be a floor scraper!
     
  3. May 6, 2012 #3

    isola96

    isola96

    isola96

    Senior Member

    Joined:
    Oct 15, 2011
    Messages:
    437
    Likes Received:
    7
    You can hammer and chizzle it off if it's on wood subfloor.
     
  4. May 7, 2012 #4

    Jasone

    Jasone

    Jasone

    Member

    Joined:
    Apr 5, 2012
    Messages:
    18
    Likes Received:
    0
    use floor scraper.
     
  5. May 12, 2012 #5

    isola96

    isola96

    isola96

    Senior Member

    Joined:
    Oct 15, 2011
    Messages:
    437
    Likes Received:
    7
    How long have you been in the laminate trade mind me asking.
     

Share This Page