Hi all - installing a new hand held shower head. I'm getting a leak where the shower arm extension screws into the water line that is inside the wall. I've done the following:
1) Used thread lock
2) Used thread lock with thread tape
3) Used a different thread lock
I've tightened it as far as possible (in fact I think I may have overtightened it) and it still leaks. Not sure what else to do at this point. I do have access from behind since I haven't hung drywall on the backside of the wall yet.
Any ideas would be appreciated at this point.
Thanks,
Mike
1) Used thread lock
2) Used thread lock with thread tape
3) Used a different thread lock
I've tightened it as far as possible (in fact I think I may have overtightened it) and it still leaks. Not sure what else to do at this point. I do have access from behind since I haven't hung drywall on the backside of the wall yet.
Any ideas would be appreciated at this point.
Thanks,
Mike