Locating Locations In Attic

Discussion in 'Electrical and Wiring' started by delbert, Jan 1, 2006.

  1. Jan 1, 2006 #1

    delbert

    delbert

    delbert

    Member

    Joined:
    Dec 28, 2005
    Messages:
    5
    Likes Received:
    0
    How to locate locations in attic with ease ?
     
  2. Jan 1, 2006 #2

    F_Eddie

    F_Eddie

    F_Eddie

    Member

    Joined:
    Jan 1, 2006
    Messages:
    13
    Likes Received:
    0
    After your customer decides where they want the new devices installed in existing drywalls, you can drill (or nail) a 1/8 hole at these locations into the attic (or floor), push a bare #14 CU about 3 feet long into the 1/8 hole then go into the attic or crawl space and locate where you want to drill the hole. The shinny copper wire is really visible with flashlight in dark attics or crawlspaces.
     

Share This Page