C Clark Member Joined Jul 30, 2008 Messages 5 Reaction score 0 Jul 30, 2008 #1 What's the best to use on a compressor and air lines, regulators, etc??
B Bushytails Well-Known Member Joined Jul 1, 2008 Messages 472 Reaction score 0 Jul 30, 2008 #2 I use tape, except for things that should be permanent, or have stripped threads. Pipe dope runs the risk of geting particles stuck in the regulators, tools, etc, and is harder to remove when needed. --Bushytails
I use tape, except for things that should be permanent, or have stripped threads. Pipe dope runs the risk of geting particles stuck in the regulators, tools, etc, and is harder to remove when needed. --Bushytails
