Prefinished hardwood flooring?

Discussion in 'Flooring' started by WestBentley, Jan 16, 2007.

Help Support House Repair Talk by donating using the link above.
  1. Jan 16, 2007 #1

    WestBentley

    WestBentley

    WestBentley

    Active Member

    Joined:
    Dec 31, 2006
    Messages:
    37
    Likes Received:
    0
    Has anyone had experience installing prefinished hardwood flooring? My parents bought some about two years ago and it's a nightmare - it's totally scratched up and you have to be neurotic about not spilling liquids (it's in their kitchen and dining room!!) because the liquid will get between the cracks and make the wood swell up under the finish.

    My fiance and I are going to have to replace hardwood flooring in the fixer upper we bought, I'd like to stick with hardwood and am trying to figure out what our options are and what the costs will be. I'd love to do bamboo, but I hear it's far too expensive.
     
  2. Jan 16, 2007 #2

    CraigFL

    CraigFL

    CraigFL

    Well-Known Member

    Joined:
    Mar 13, 2006
    Messages:
    409
    Likes Received:
    0
    I put prefinished hardwood flooring in the kitchen 6 years ago. It's a mess because of the wear/water damage. I had tile before but when someone dropped a glass, it turned to dust. Now the glasses don't break but just spread liquids all over. I may try a laminate floor--wood lookalike.
     
  3. Jan 16, 2007 #3

    glennjanie

    glennjanie

    glennjanie

    Well-Known Member

    Joined:
    Mar 1, 2006
    Messages:
    2,990
    Likes Received:
    4
    Hello Julia:
    Our house has original hardwood (1956) everywhere except the kitchen and baths. The kitchen has sheet vinyl and the baths have ceramic tile (floor and 4' of walls). These rooms are going to have spills on the floors and I don't think it is any place for hardwood; Laminates will give the look of wood and the wear of plastic without any bucking or loosing the finish.
    Pre-finished hardwoods are usually stained and clear coated with a variety of finishes. The stain dramatically highlights scratches which makes me want to go with a natural finish. Then you can strip the floors with a commercial buffer (with a fine sanding disc) every few years and refinish with polyurethane varnish. Our hardwood floors will outlast me by several years.
    Glenn
     
  4. Jan 16, 2007 #4

    WestBentley

    WestBentley

    WestBentley

    Active Member

    Joined:
    Dec 31, 2006
    Messages:
    37
    Likes Received:
    0
    Our hardwood is currently in the hallway and dining room, and I'd love to keep it there. I know I spill much less at the dining table then I do in the kitchen, but we do have a sliding glass door going to the backyard and I don't want to end up like my parents, obsessing over minor amounts of dirt and water.

    Sounds like my instincts were right, avoid the pre-finished stuff, and install unfinished that I can sand and finish myself so I can refinish it when it gets scuffed rather than starting over. I say "I" but I probably mean Aaron, lol ;)

    Anyone had experience with bamboo floors?
     
  5. Jan 16, 2007 #5

    CraigFL

    CraigFL

    CraigFL

    Well-Known Member

    Joined:
    Mar 13, 2006
    Messages:
    409
    Likes Received:
    0
    Be aware that you can sand and refinish most of the prefinished floors at least one time--some two times.
     
  6. Jan 17, 2007 #6

    glennjanie

    glennjanie

    glennjanie

    Well-Known Member

    Joined:
    Mar 1, 2006
    Messages:
    2,990
    Likes Received:
    4
    Hi Julia:
    You could make a 2' x 6' area of ceramic tile in front of the sliding door to save the hardwood. Just a thought.
    I may have misled you too far about the natural finish; I meant to say you would probably want to use a natrual pre-finish. That could be buffer sanded at 5 year intervals and look real good. The old fashioned hardwood would be a lot of work and heartaches to get laid and finished. We can go lighter on poor Aaron.
    Glenn
     
  7. Jan 17, 2007 #7

    WestBentley

    WestBentley

    WestBentley

    Active Member

    Joined:
    Dec 31, 2006
    Messages:
    37
    Likes Received:
    0
    LOL.. well we've gotten a lead on some really nice red oak from a local supplier. It's the locking grooved kind. Aaron's parents put it into a room roughly the same size as our dining room themselves, and they are both on permanent disability, so I figure if they can manage, we can too. They happen to have 2 left over bundles from when they did their floor which should be enough to cover our hallway, plus as a bonus, the supplier is having a sale!

    For a 12X12 room, it's $2.69/sqf, and 18.66 sqf per bundle, so we are looking at around $400 dollars. It's 4" red oak, unfinished. His folks said sanding it a little after it's laid and then polyurethaning it were no sweat. Do you think their memories have rose colored glasses on?
     
  8. Jan 18, 2007 #8

    glennjanie

    glennjanie

    glennjanie

    Well-Known Member

    Joined:
    Mar 1, 2006
    Messages:
    2,990
    Likes Received:
    4
    I couldn't comment about the rose colored glasses but professional hardwood people use a high speed drum sander to even it up. It takes several sandings with different grit sandpaper. The biggest problem with the drum sander is keeping it from digging in where you start each pass of sanding.
    One thing I learned by experience (although my Son told me so) is that the waterbased polyurethane will not hold up; use the oil based kind for endurance and make that several coats.
    Glenn
     
  9. Jan 18, 2007 #9

    WestBentley

    WestBentley

    WestBentley

    Active Member

    Joined:
    Dec 31, 2006
    Messages:
    37
    Likes Received:
    0
    Hmm, now I'm getting conflicting info (from my previous info, not yours) that prefinished is better because they treat it with aluminum oxide so it's impossible to scratch, and water can sink in even if it's hardwood that was poly'd over. Aaron and I will be visiting the hardwood store together this weekend to try and figure out which way we are going. They have the wood I like in prefinished for $2.89 and we can choose a stain color to match our cabinets (hopefully) without having to stain is ourself taht way...
     
  10. Jan 19, 2007 #10

    glennjanie

    glennjanie

    glennjanie

    Well-Known Member

    Joined:
    Mar 1, 2006
    Messages:
    2,990
    Likes Received:
    4
    The stain is the problem, it highlights the scratches. That's why I like the natural finish.
    Glenn
     
  11. Jan 22, 2007 #11

    evansvillehousewife

    evansvillehousewife

    evansvillehousewife

    New Member

    Joined:
    Jan 22, 2007
    Messages:
    4
    Likes Received:
    0
    We just installed 8 inch wide oak planks in our kitchen, unfinished, and plan on using tung oil based waterlux to finish it. We are not going to stain.

    We have undergone amazing steps to make this floor possible, as we are replacing a carpet that was laid over a cracked cement slab. I can't wait to post the finished pics.


    We chose this way because my husband is big on authenticity (I am too, I guess, he just goes way overboard!) and the engineered/laminate looked terrible when I saw it in other's homes. Plus, it was actually MORE expensive per square foot, and since we have a 220 sq ft kitchen, that was a big deal.
     
  12. Jan 22, 2007 #12

    WestBentley

    WestBentley

    WestBentley

    Active Member

    Joined:
    Dec 31, 2006
    Messages:
    37
    Likes Received:
    0
    Well after talking to sales people from various stores locally over the weekend, it looks like we are skipping hardwood altogether. With at least one sizable (60 lb) dog that is prone to doing the "boxer burn" inside the house (a mad dash of crazed running out of nowhere - very endearing, but not easy on wood!) and the possibility of adding another dog in the future, scratches are just too much a possibility/problem for us to reconcile spending money we don't really have in the first place.

    As much as I loathe using nasty materials that will outgas us for the next 10 yrs, we may end up going with snap-lock laminate 16X16 tiles because they are cost effective and near impossible to scratch - the saleman scraped a quarter across the top for us after we mentioned our dogged reservations.
     

Share This Page