So Sunday, 2 days ago, decided to fix a leaky kitchen faucet. 1 handle Pfister. Leaked only from bottom around the granite. Guessed (without too much confidence, I'm new to home ownership) the cause could be from cartridge so I removed it, couldn't find a replacement locally, so ordered one online. Slapped it in today, screwed it all together, turned the water back on from under the sink and nothing. Not even a drip. Took it back apart figuring the cartridge had a plug or something, but nope, it was good to go. Even took out cartridge and left it empty and turned on water expecting it to spray everywhere. Nothing. All other sinks in house work, but this is bone dry now.
I did get nervous the source of the leak was so far below the cartridge I was replacing it might bot be the right fix so I also tightened the one of the screws under the sink which anchors the faucet. Any chance I could have damaged something there? I moved one screw about 3/4 of a turn.
I'm totall flummoxed here. The only water turned off was the two valves under the sink. They were off for about 2 days total.
Thanks in advance for any advice.
I did get nervous the source of the leak was so far below the cartridge I was replacing it might bot be the right fix so I also tightened the one of the screws under the sink which anchors the faucet. Any chance I could have damaged something there? I moved one screw about 3/4 of a turn.
I'm totall flummoxed here. The only water turned off was the two valves under the sink. They were off for about 2 days total.
Thanks in advance for any advice.