In my bathroom I have a sink and 4' away a tub w/shower. The water pressure and output at the sink is good. But at the bath the hot water is about 1/8 of what it should be! More like a trickle. I opened and removed the faucet and it was fine but I replace it anyway. So this is not the problem. I am thinking it most likely is some blockage (if it were a leak I would have a flood here and I would know it!) in the pipe between the sink and the bath - is this a correct assumption?
And if so what is my next step - should I try snaking it? If so what kind of snake do I use?
Any information helpful to this amateur,
Thanks
And if so what is my next step - should I try snaking it? If so what kind of snake do I use?
Any information helpful to this amateur,
Thanks