Service Entrance

Discussion in 'Roofing and Siding' started by tomtoolman12345, Apr 7, 2008.

  1. Apr 7, 2008 #1

    tomtoolman12345

    tomtoolman12345

    tomtoolman12345

    Member

    Joined:
    Mar 5, 2008
    Messages:
    17
    Likes Received:
    0
    I am doing over a small roof at my camp, about 15 square. The service entrance enters the house on the roof with a 2 and a half inch pipe. The only problem I am running into is, I cannot place a roof boot around this because there is no way I could put it over the wires and down onto the pipe. In other words I am looking for a way to somehow put a roof boot on it or place a storm collar of somesort. Thank you in advance. Tom.
     
  2. Apr 7, 2008 #2

    Square Eye

    Square Eye

    Square Eye

    Well-Known Member

    Joined:
    Jan 13, 2006
    Messages:
    1,273
    Likes Received:
    10
    [​IMG]

    This is the most secure thing around but you still need to caulk or otherwise seal the top

    http://www.buildmartstore.com/retrospin.html

    This is the only source I know of.
    I have seen small storm collars with a slip-fit join on one side. It opens up to go around the pipe and slips back together at the opening. Those should be available at a local plumbing or roofing supply house.
    There are also many fabric wrap then brush on systems available but they can't possibly be as durable as metals.
    Good luck!
    Whatever you do, post a pic and let us see what you come up with :)
     

Share This Page