siding material question

Discussion in 'Roofing and Siding' started by farmkid, Nov 3, 2010.

  1. Nov 3, 2010 #1

    farmkid

    farmkid

    farmkid

    Member

    Joined:
    Jul 8, 2010
    Messages:
    11
    Likes Received:
    3
    I want to add a little onto my house next spring after it warms up, but I have a siding problem to figure out first. I don't know what the siding material is called or where I can find more of it. The house was built in 1977 and I'm sure the siding is original. The material is some kind of fiberboard about 12 inches wide and 1/2 inch thick. There are aluminum inserts between pieces where they are joined. Does anyone know what this stuff is called and if it's still available. I haven't been able to find it anywhere so far.

    The addition I want to do is just a small entryway, so I won't need very much of it. If I can't find any, I'll have to settle for having that part sided with something else, or I'll have to wait to do the project until I can afford to replace all the siding.
     
  2. Nov 4, 2010 #2

    remmons

    remmons

    remmons

    Active Member

    Joined:
    Oct 6, 2010
    Messages:
    25
    Likes Received:
    2
    It sounds very much like a Fiberboard Lap siding. Is yours textured or smooth? It is made in 4", 8" and 12" widths, 16' long, and is usually about 7/16" thick. It is also called "Bender Board", because a lot of the masonry guys use it to form curbs, sidewalks, etc. The 8" typically sells for around $11.00 and the 12" sels for around $14.00, depending on the market area. It is typically available from most any lumber yard, I know that Boise Cascade usually stocks it (in my area anyway). I stock it at my store.
     
  3. Nov 5, 2010 #3

    farmkid

    farmkid

    farmkid

    Member

    Joined:
    Jul 8, 2010
    Messages:
    11
    Likes Received:
    3
    Thanks for that information. I'll look for it. There's a Home Depot and a Lowe's here, but I haven't seen it at either place. There are also a couple of contractor-oriented building supply stores that I haven't checked yet.

    As for your question, it's smooth.
     
  4. Nov 8, 2010 #4

    remmons

    remmons

    remmons

    Active Member

    Joined:
    Oct 6, 2010
    Messages:
    25
    Likes Received:
    2
    No problem. Good luck on your search. Typically, if you ask any lumber retailer, they should be able to bring it in for you.:) If they do not, then they probably don't want your money.:(
     

Share This Page